Before you begin
Read the directions completely to make sure you understand and are comfortable
completing each step. Work slowly and be careful. Remove your watch, rings, and bracelets for safety.
Warning: Golf cart voltage can cause injury. Not experienced? Get professional
assistance.
Step 1: Safety
Park you golf cart on a level surface, apply the parking brake and remove the key. Remove the lower seat.
Step 2: Attach Brackets
Match the locators on the brackets for PORTABLE as see in the diagram and snap
firmly into place.
Mount the blower using the supplied suction cups to a smooth, clean,
surface.
Step 3: Attach Battery Clips
Attach the battery clips to the power cable by pushing the connectors firmly
together.
Step 4: Power Cable
Feed the power cable into the battery compartment. Be sure the cable is not a
hazard to the passengers.
Step 5a: Battery Connection - 12-Volt
Blower (36-Volt System) For 12V blowers (36V carts), select two batteries connected
inline with each other. You are going to connect one wire to each of two 6V
batteries to get the required 12V for the blower motor. Carefully connect the
ground wire to the negative (-) battery post as indicated. Then on the adjacent
battery connected inline, attach the red wire with the inline fuse to the
positive (+) battery post as shown.
OR
Step 5b: Battery Connection - 24-Volt
Blower (48-Volt System) For 24V blowers (48V carts), the same as Step 6a except you are
going to connect one positive and one negative wire only to each end of three
8-volt batteries connected in line to get the required 24V for the blower motor.
OR
Step 5c: Battery Connection - Gas
Powered Cart - 12-Volt Blower Connect the ground wire to the negative (-)
battery post and the red positive wire attached to the inline fuse to the
positive (+) battery post.
Step 6: Feel The Breeze
Test your
BREEZeasy
using the 3-speed switch and reinstall the seat.
